• Insulation Oil Purifier
  • Wide Scale of Purification Solutions
Home > News > industry-news>

Vacuum oil filter model specification introduction

Time:2025-03-26 14:44:34  Reading volume:

The common vacuum oil filters on the market are classified into transformer oil vacuum oil filters according to the type of oil, which are subdivided into high-efficiency (single-stage) vacuum oil filters, two-stage vacuum oil filters, and a load tap changer oil filter with a small flow rate that is directly connected to the transformer without stopping. Turbine oil vacuum oil filters are also called turbine oil vacuum oil filters, lubricating oil vacuum oil filters, gear oil vacuum oil filters, etc.


The function of the vacuum oil filter is to treat the moisture and impurities in the oil. The amount of water in the oil determines the choice of vacuum oil filter configuration, which is an important factor, as well as the flow performance of the oil.


The specifications of the vacuum oil filter are divided into 10-type vacuum oil filters, 30-type vacuum oil filters, 50-type vacuum oil filters, etc., according to the amount of oil to be processed. The largest can reach 500-type vacuum oil filters. Generally speaking, for oil volumes below 1 ton, it is recommended to use a 30L/min model, and for equipment with oil storage tanks larger than 20 tons, it is recommended to use a 200L/min or higher model. For example: Type 30 oil filter is suitable for 1t oil tank, Type 50 oil filter is suitable for 3t oil tank, Type 100 oil filter is suitable for 6t oil tank...


An important selection factor for a vacuum oil filter is the use conditions. For example, chemical enterprises usually need to choose explosion-proof spare parts, and outdoor use requires the addition of a waterproof and moisture-proof appearance structure.


The above is some small knowledge summarized about oil filter. For more model specification introduction and selection knowledge, please discuss with us.


Choose the model according to the oil you need to filter and the conditions:

(1) Turbine oil: Choose ZJC-T, ZCP-T series oil filter


(2) Insulating oil: Choose ZJB, ZJA series oil filter; Ultra-high voltage and large transformers should choose ZJA two-stage high-efficiency vacuum oil filter


(3) Transformer on-load tap changer online oil filter uses DZX online oil filter


(4) Hydraulic oil, compressor oil, refrigeration oil, gear oil: Choose ZJC series oil filter


(5) Fuel oil, light oil: Choose ZCP series oil filter, SM


(6) Hydraulic oil contains a lot of water; you can choose the ZJC series oil filter


(7) For high-precision filtration of hydraulic oil, you can choose the DNM series oil filter


(8) High-viscosity oil: Choose the ZJM series oil filter


(9) Lubricating oil/hydraulic oil contains a lot of impurities and water; you can choose the ZJC-LY series oil filter


(10) If the equipment does not require high oil consumption and only needs to remove mechanical impurities, you can choose the LY plate and frame oil filter or the ZJL series oil filter vehicle according to the situation. If you need to meter the oil tank of the equipment, you can choose the YTD series metering filter refueling machine.


vacuum oil filters.turbine oil filters oil filter