E-mail sinonshseo@gmail.com
Time:2025-03-11 10:28:38 Reading volume:643
Explosion-proof oil filter can also be called vacuum oil purifier, oil filter or vacuum oil filter. It has the following characteristics: small size, light weight, easy to move, low noise, long continuous working time, stable performance and easy operation.
It can be used for on-site oil filtering, oil replenishment and on-site hot oil circulation drying of various oil-immersed transformers, oil-immersed current and voltage transformers and high-voltage oil-less circuit breakers, especially for on-site hot oil circulation drying of oil-immersed current and voltage transformers and high-voltage oil-less circuit breakers.
It is more effective. It can also perform on-site vacuum oil filling and oil replenishment and equipment vacuuming for sealed oil-immersed equipment, regenerate and purify slightly deteriorated transformer oil, so that its performance reaches the qualified oil standard. In addition, it can also be used in power plants, power stations, power companies, substation industry, metallurgy, petrochemical, machinery, transportation, railways and other industries.
1. Since the vacuum oil filter is used less frequently (once every one or two years), the operator should read the instructions carefully before operation and must be familiar with the operation method of the oil filter equipment.
2. Operate strictly by the operating sequence of the manual, strictly control the oil level in the oil tank, and prevent the supplementary treated oil from being sucked into the vacuum pump.
3. The oil temperature is generally controlled at 40~60℃ (unless otherwise specified in the manual).
4. During use, frequently check whether the oil pipe joints and valves of the oil filter equipment are blocked or leaking. If a fault is found, the machine should be stopped for inspection and treatment immediately. Anti-static grounding measures should be taken for the metal pipes of the oil filter and the oil system.
5. When the outlet oil pressure of the vacuum oil filter is greater than 0.3MPa during operation, the cause should be checked. If there is a blockage, the machine should be stopped for cleaning or replacement of the filter element.
6. Operators must strictly abide by their posts, be responsible, and must not do other irrelevant things while on duty.
7. It is strictly forbidden to use fireworks at the oil filter work site, and smoking is prohibited near the oil filter equipment.
8. The on-duty personnel should pay attention to the oil inlet and outlet and the operation of the motor. Phase-missing operation is strictly prohibited.
9. When using an oil heater, the oil pump should be turned on first. When the heater is put into use, the operation sequence is the opposite when it is shut down.
10. If the heater is put into use, it should be shut down 5 minutes before shutting down to prevent accidents caused by dry-burning of the heater.
11. After the work is completed, cut off the power supply and clean up the site.