Solution to the oil control system failure of oil purifier

The failure of the oil control system of the oil purifier may be caused by many reasons. Here are some common solutions:

1. Check the power supply and circuit

- Power connection: Make sure the power supply is normal and the plug is not loose.

- Fuse: Check whether the fuse is blown and ｒｅｐｌａｃｅ it if necessary.

- Circuit board: Check whether the circuit board has burnt or damaged components and ｒｅｐｌａｃｅ it if necessary.

2. Check the sensor

- Oil level sensor: Confirm whether the oil level sensor is working properly, clean or ｒｅｐｌａｃｅ the damaged sensor.

- Pressure sensor: Check whether the pressure sensor is accurate, calibrate or ｒｅｐｌａｃｅ it if necessary.

3. Check the oil pump

- Oil pump operation: Confirm whether the oil pump is running normally, clean the blockage or ｒｅｐｌａｃｅ the faulty oil pump.

- Oil pump motor: Check whether the motor is working properly, and repair or ｒｅｐｌａｃｅ it if necessary.

4. Check the oil circuit

- Oil circuit blockage: Check whether the oil circuit is blocked and clean the blocked part.

- Oil pipe connection: Ensure the oil pipe connection is firm and there is no leakage.

5. Check the control system

- Control panel: Check if the control panel is faulty, restart or ｒｅｐｌａｃｅ if necessary.

- Control program: Confirm whether the control program is running normally, reprogram or ｕｐｄａｔｅ if necessary.

6. Check the oil quality

- Oil contamination: Check if the oil is contaminated, and ｒｅｐｌａｃｅ with new oil if necessary.

- Oil temperature: Ensure the oil temperature is within the normal range. Too high or too low will affect the operation of the system.

7. Check mechanical parts

- Valves: Check if the valve is stuck or damaged, clean or ｒｅｐｌａｃｅ if necessary.

- Filters: Check if the filter is clogged, clean or ｒｅｐｌａｃｅ if necessary.

8. Contact professional maintenance

- If the above methods cannot solve the problem, it is recommended to contact professional maintenance personnel for inspection and maintenance.

9. Regular maintenance

- Regularly maintain the oil purifier, clean and ｒｅｐｌａｃｅ worn parts to ensure long-term stable operation of the system.

The above steps can usually solve the problem of oil purifier oil control system failure. If the problem is complicated, it is recommended to seek professional help.