Introduction of different series of vacuum oil filters

ZJB series vacuum oil filter

Purpose: This machine is suitable for treating unqualified transformer oil, transformer oil, switch oil and other insulating oils.

Advantages: 

This machine is a new type of vacuum oil filter, with three-dimensional flash evaporation and microgram technology, and adopts a combination of mesh filtration and polymer adsorption to remove impurities. Its efficiency is 5-8 times higher than that of general vacuum oil filters, no consumables are required, and the energy consumption is extremely low.

ZJA series two-stage vacuum oil filter

Purpose: Suitable for the treatment of unqualified new oil, imported oil and ultra-high transformer oil, especially suitable for large-scale power transmission and transformation equipment above 110KV and the main national power grid, and especially suitable for areas above 500 meters above sea level.

Advantages: 

Compared with the single-stage vacuum oil filter, this machine has faster and more effective dehydration, degassing and impurity removal effects, and a higher oil limit withstands voltage value. This machine has a bridge vacuum connection system, which can be used as an oil filter or as an independent vacuum source for vacuum oil filling of power insulation equipment.

ZJL series multifunctional oil treatment machine

Purpose: This machine is suitable for the maintenance and installation of power insulation equipment such as transformers, oil switches, mutual inductors, etc. that have been in operation for many years, and is especially suitable for the regeneration of seriously inferior insulating oil.

Advantages:

This machine can not only remove moisture, impurities, and gases from unqualified insulating oil and improve its withstand voltage value, but also make the acid value, pH value and other indicators in the insulating oil meet national standards, and can filter-free carbon, deep oxides, etc., so that the various indicators of insulating oil are comprehensively improved.

ZJD series lubricating oil filter

Purpose: Widely used in power, metallurgy, mining, machinery, chemical industry, transportation, manufacturing, food and other industries, for the regeneration of unqualified hydraulic oil, refrigeration oil, pressure-soluble oil, gear oil heat treatment oil, anti-wear hydraulic oil and other high-precision lubricating oils.

Advantages: The hydraulic lubricating oil treated by this machine has a low emulsification value, very little water content, and high impurity precision. It can be reused repeatedly in high-precision hydraulic lubrication equipment at home and abroad.

(ZJD-F) Series Fuel Oil and Light Lubricating Oil Filter

Purpose: To process various unqualified fuel oil, kerosene, diesel, and light lubricating oil. It can quickly separate half oil and half water oil, and the cleanliness can reach NAS6 level; the cart-type design is easy to use and suitable for light oil with high water content.

NRY Series Internal Combustion Engine Oil Decolorization Filter

Purpose: Suitable for regeneration, decolorization and reduction of low-grade waste internal combustion engine oil; it can also process other types of waste engine oil and engine oil for regeneration, decolorization and utilization.

Features: After processing various waste engine oils, they are restored to base oil. Depending on the oil conditions, the waste oil recovery rate can reach 70%-95%, and the color of the treated oil is the same as that of the new oil.

BZ Transformer Oil Regeneration Device

Purpose: Suitable for regeneration and decolorization of degraded transformer oil, switch oil, insulating oil, etc.

ZJC series turbine oil filter

Purpose: used to treat unqualified turbine oil, widely used in othe nline treatment of turbine oil of steam turbines, gas turbines, and water turbines in the power, chemical, papermaking, metallurgy and other industries, to ensure the normal operation of the unit adjustment and wetting system, and can also process low-viscosity wetting and cooling oil. It can realize unattended online operation with steam turbines, water turbines and other equipment.

Advantages:

1. This series of products have multiple technologies, integrating vacuum drying, separation engineering technology, condensation technology, adsorption and secret filtration technology.

2. It can automatically drain water without stopping the machine so that the waste oil reaches the use standard of new oil.

YL precision light filter oiler

Purpose: finely filter harmful mechanical impurities in oil, it is a device for refueling, pumping, high-precision impurity removal, and cleaning oil system pipelines for transformers, machine tools, oil switches and other equipment with small oil consumption in various industries such as power, petrochemical, metallurgy, machinery, mining, and railways. It is especially suitable for long-distance and high-lift refueling and oil pumping in the power department.

Features: It is equipped with three-stage filtration, light and flexible, easy to operate, does not require filter paper, and does not pollute the site.

The machine is small and light, flexible to move, and cheap.

ZLQ series phosphate ester fire-resistant oil filter

Application: Purification and regeneration of fire-resistant hydraulic oil in the speed control system of large and medium-sized thermal power generator sets.

Features: 

1. Small size, lightweight, easy to move.

2. Adopt all stainless steel materials and special filter materials.

3. Good adaptability of materials and phosphate esters, no leakage, no corrosion.

4. Automatic control, low-temperature online operation, pure physical purification, no secondary pollution.

Advantages: 

The fire-resistant hydraulic oil treated by this machine has very little water content and high impurity accuracy, can be reused in high-precision hydraulic equipment at home and abroad.