How to maintain the oil pump of the oil purifier?

The oil pump maintenance of the oil purifier is the key to ensuring its long-term stable operation. The following are the maintenance steps:

1. Daily inspection

- Oil level monitoring: Check the oil level of the oil pump regularly to ensure that it is within the normal range. If it is insufficient, add it in time.

- Leakage check: Check whether the oil pump and pipeline are leaking. If a leak is found, it should be dealt with immediately.

- Noise and vibration: Pay attention to abnormal noise or vibration during operation. If there is any abnormality, stop the machine for inspection.

2. Regular maintenance

- ｒｅｐｌａｃｅ the filter element: ｒｅｐｌａｃｅ the filter element regularly according to the manufacturer's recommendations to prevent blockage from affecting the performance of the oil pump.

- Clean the oil pump: Clean the inside of the oil pump regularly to remove impurities and sediments.

- Check the seals: Check and ｒｅｐｌａｃｅ worn seals regularly to prevent leakage.

3. Lubrication and maintenance

- Lubricate the bearings: Lubricate the bearings regularly according to the manufacturer's requirements, and use appropriate grease or lubricating oil.

- Check the coupling: Check the alignment and wear of the coupling regularly, and adjust or ｒｅｐｌａｃｅ it if necessary.

4. Electrical maintenance

- Motor inspection: Check the motor running status regularly to ensure there is no overheating or abnormal noise.

- Wiring inspection: Check whether the electrical wiring is firm to prevent loosening or short circuits.

5. Operation monitoring

- Pressure monitoring: Check the inlet and outlet pressure of the oil pump regularly to ensure that it is within the normal range.

- Temperature monitoring: Monitor the temperature of the oil pump and oil to prevent overheating.

6. Shutdown maintenance

- Long-term shutdown: If it is not used for a long time, the oil in the oil pump should be drained and cleaned to prevent internal corrosion.

- Dust prevention measures: Cover the oil pump when shutting down to prevent dust from entering.

7. Records and reports

- Maintenance records: Record the content and time of each maintenance in detail to facilitate tracking of equipment status.

- Fault report: Report and handle faults promptly to avoid the expansion of problems.

8. Training and safety

- Operation training: Ensure that operators are trained and familiar with the operation and maintenance of oil pumps.

- Safety measures: Follow safety regulations during maintenance to prevent accidents.

Through the above measures, the service life of the oil pump can be effectively extended and the stable operation of the oil purifier can be ensured.